front and rear rubbers
-
- alter Bekannter
- Beiträge: 63
- Registriert: Mi 02 Dez, 2009 22:29
- Fahrzeug 1: m151a2 mutt
- Fahrzeug 2: volvo sugga
- PLZ: 3751
front and rear rubbers
hello
i live in Holland and i am a new owner for three weeks now from a sugga
i have also a m151 a2 mutt
the sugga complete car it has
extern heater device new
all radio`s and antenne`s (i don`t know if they are working )
one bike on the back
axe and shovel
a pair of ski `s
a pair of snow shoes
now my problems
the front window is leaking
the former owner had the windscreen made to small
now i have let made a new one triplex glass €35,-
is there only one rubber seal or two
is there a drawing or picture of it
do you know witch model of rubber is for the rear boot
and for the rear window rubber i found in the forum the barkas rubber fits ??
if it has a dutch license i will set some picture`s of it
thanks for the answers
george
i live in Holland and i am a new owner for three weeks now from a sugga
i have also a m151 a2 mutt
the sugga complete car it has
extern heater device new
all radio`s and antenne`s (i don`t know if they are working )
one bike on the back
axe and shovel
a pair of ski `s
a pair of snow shoes
now my problems
the front window is leaking
the former owner had the windscreen made to small
now i have let made a new one triplex glass €35,-
is there only one rubber seal or two
is there a drawing or picture of it
do you know witch model of rubber is for the rear boot
and for the rear window rubber i found in the forum the barkas rubber fits ??
if it has a dutch license i will set some picture`s of it
thanks for the answers
george
- deckard
- Sugga Elektriker
- Beiträge: 2515
- Registriert: Fr 07 Jul, 2006 20:52
- Fahrzeug 1: Volvo TP21 B36
- Fahrzeug 2: Volvo PV544C B18
- Fahrzeug 3: Chevy Impala 1967
- PLZ: 5020
Re: front and rear rubbers
Hey,
Congrats to your new car...
There is only one seal for the front windshield, that is made for the Sugga only. Since the windshield is made to tilt forward, it will never be water tight. that is why suggas have metal rails left and right under the window with small rubber hoses running behind the dashboard and into the engine compartment where they drain. But even that doesn't work too well... the water through the windshield is part of the deal...
the rubber seals for the windscreen are hard to come by.
The Barkas fits. Yes.
As for the boot, I took some pretty thick hollow rubber seal that I found at a shop specialiced in rubber products, that I cut und glued into the groove.
Good luck.
Congrats to your new car...
There is only one seal for the front windshield, that is made for the Sugga only. Since the windshield is made to tilt forward, it will never be water tight. that is why suggas have metal rails left and right under the window with small rubber hoses running behind the dashboard and into the engine compartment where they drain. But even that doesn't work too well... the water through the windshield is part of the deal...
the rubber seals for the windscreen are hard to come by.
The Barkas fits. Yes.
As for the boot, I took some pretty thick hollow rubber seal that I found at a shop specialiced in rubber products, that I cut und glued into the groove.
Good luck.
Some say... He sucks the moisture from ducks... (J. Clarkson)
- küppi
- Petrolhead Tim Taylor
- Beiträge: 1308
- Registriert: Do 28 Sep, 2006 11:41
- Fahrzeug 1: Volvo Amazon R
- Fahrzeug 2: Volvo Amazon
- Fahrzeug 3: Volvo Tp21 "Sugga"
- PLZ: 4234
Re: front and rear rubbers
hallo zusammen... erst mal glückwunsch zum neuen sugga...
ich habe mir das ganze mal von googel übersetzen lassen.... aber die kamen mit den begriffen nicht zurecht...
wenn ich richtig verstanden habe geht es um eine undichtes frontscheibengummi, und eine zu kleine scheibe....
außerdem das du deck wasserabläufe im scheibenrahmen hast?
jemanden für gestempelte grade scheiben habe ich..... das mit der dichtung wird schwirig...
grüße küppi
ich habe mir das ganze mal von googel übersetzen lassen.... aber die kamen mit den begriffen nicht zurecht...
wenn ich richtig verstanden habe geht es um eine undichtes frontscheibengummi, und eine zu kleine scheibe....
außerdem das du deck wasserabläufe im scheibenrahmen hast?
jemanden für gestempelte grade scheiben habe ich..... das mit der dichtung wird schwirig...
grüße küppi
Ich kann alles reparieren....nur leider bleiben immer Teile übrig... :part42
- deckard
- Sugga Elektriker
- Beiträge: 2515
- Registriert: Fr 07 Jul, 2006 20:52
- Fahrzeug 1: Volvo TP21 B36
- Fahrzeug 2: Volvo PV544C B18
- Fahrzeug 3: Chevy Impala 1967
- PLZ: 5020
Re: front and rear rubbers
Kueppi. Die Scheiben hat er schon. Ihm geht's nur um die Dichtungen. Die Ablaufe haben alle Suggas, nur sind sie meistens zerlegt und demontiert und zerfallen...
Some say... He sucks the moisture from ducks... (J. Clarkson)
- küppi
- Petrolhead Tim Taylor
- Beiträge: 1308
- Registriert: Do 28 Sep, 2006 11:41
- Fahrzeug 1: Volvo Amazon R
- Fahrzeug 2: Volvo Amazon
- Fahrzeug 3: Volvo Tp21 "Sugga"
- PLZ: 4234
Re: front and rear rubbers
hallo kannst du mir ein bild davon senden?
ich habe nach dem reinigen der fensterrahmen (rostkontrolle ) nirgens so etwas gesehen....
wo sollen die den sein?
grüße küppi
ich habe nach dem reinigen der fensterrahmen (rostkontrolle ) nirgens so etwas gesehen....
wo sollen die den sein?
grüße küppi
Ich kann alles reparieren....nur leider bleiben immer Teile übrig... :part42
- deckard
- Sugga Elektriker
- Beiträge: 2515
- Registriert: Fr 07 Jul, 2006 20:52
- Fahrzeug 1: Volvo TP21 B36
- Fahrzeug 2: Volvo PV544C B18
- Fahrzeug 3: Chevy Impala 1967
- PLZ: 5020
Re: front and rear rubbers
Hier siehst du die Leisten:
http://www.conceptcarz.com/view/photo/1 ... photo.aspx" onclick="window.open(this.href);return false;
http://www.conceptcarz.com/view/photo/1 ... photo.aspx" onclick="window.open(this.href);return false;
Some say... He sucks the moisture from ducks... (J. Clarkson)
- Karsten
- Luftgekühlt
- Beiträge: 48128
- Registriert: Do 24 Jul, 2003 11:23
- Fahrzeug 1: Land Rover Defender 110 Td5
- Fahrzeug 2: 712K
- Fahrzeug 3: Opel Movano 2,5 CDTI
- Fahrzeug 4: was flaches
- PLZ: 82467
- Ort: Garmisch-Partenkirchen
Re: front and rear rubbers
Hi George,
congratulations!
Please tell me the details of your car for the regestry:
http://forum.off-road-forum.de/volvo-tp ... 15328.html" onclick="window.open(this.href);return false;
Greetings Karsten
congratulations!
Please tell me the details of your car for the regestry:
http://forum.off-road-forum.de/volvo-tp ... 15328.html" onclick="window.open(this.href);return false;
Greetings Karsten
Zwei Dinge sollen Kinder von ihren Eltern bekommen: Wurzeln und Flügel.
Johann Wolfgang von Goethe
Wenn es ganz still wird, beginnen die Dinge zu sprechen.
Ernst Jünger
Johann Wolfgang von Goethe
Wenn es ganz still wird, beginnen die Dinge zu sprechen.
Ernst Jünger
-
- alter Bekannter
- Beiträge: 63
- Registriert: Mi 02 Dez, 2009 22:29
- Fahrzeug 1: m151a2 mutt
- Fahrzeug 2: volvo sugga
- PLZ: 3751
Re: front and rear rubbers
hello
thanks for the info
the allu rails are there i will look if the hoses are open or not
for karsten
i have not a dutch license yet
after tad i will sent the registry a mail
the chassis nr is 491
george
thanks for the info
the allu rails are there i will look if the hoses are open or not
for karsten
i have not a dutch license yet
after tad i will sent the registry a mail
the chassis nr is 491
george
- küppi
- Petrolhead Tim Taylor
- Beiträge: 1308
- Registriert: Do 28 Sep, 2006 11:41
- Fahrzeug 1: Volvo Amazon R
- Fahrzeug 2: Volvo Amazon
- Fahrzeug 3: Volvo Tp21 "Sugga"
- PLZ: 4234
Re: front and rear rubbers
ah jetzt verstehe ich... du meinst die lochleiste am innenrahmen... die habe ich auch
ich dachte an einen wasserablauf am scheibenrahmen der karosserie
der GOS sugga ist meines wissens auf eine feste scheibe umgebaut worden. dazu müste die dichtung eines 800 taxi zu bekommen sein...
grüße küppi
ich dachte an einen wasserablauf am scheibenrahmen der karosserie
der GOS sugga ist meines wissens auf eine feste scheibe umgebaut worden. dazu müste die dichtung eines 800 taxi zu bekommen sein...
grüße küppi
Ich kann alles reparieren....nur leider bleiben immer Teile übrig... :part42
- deckard
- Sugga Elektriker
- Beiträge: 2515
- Registriert: Fr 07 Jul, 2006 20:52
- Fahrzeug 1: Volvo TP21 B36
- Fahrzeug 2: Volvo PV544C B18
- Fahrzeug 3: Chevy Impala 1967
- PLZ: 5020
Re: front and rear rubbers
Nope.... nicht die Lochleiste. An der Karosserie ist ein Alurahmen, der vor den Belüftungsdüsen vorbeiläuft. Der sammelt das wasser.
Yes George. Its the Alu that I mean. The hoses should be hanging loose down in the engine compartment.
Yes George. Its the Alu that I mean. The hoses should be hanging loose down in the engine compartment.
Some say... He sucks the moisture from ducks... (J. Clarkson)